Author Topic: Mystery Douglas Part - now sold  (Read 823 times)

0 Members and 1 Guest are viewing this topic.

Offline A31ndrew

  • Full Member
  • **
  • Join Date: Oct 2014
  • Posts: 42
  • Location: Bedfordshire
Mystery Douglas Part - now sold
« on: 17 Sep 2023 at 19:57 »
This appears to be part of an inlet manifold assembly, although I do not know from which model. Hole centres at the flange are 1.83" and the O/D of the plated stub is 1.1/8". There are traces of solder on the stub where, I presume, it was soldered into a manifold block. Overall condition is rusty but useable. More dimensions available if needed.
« Last Edit: 16 Oct 2023 at 13:48 by A31ndrew »

Offline eddie

  • Master Member
  • ****
  • Join Date: Mar 2006
  • Posts: 1864
  • Location: Hampshire, UK
Re: Mystery Douglas Part
« Reply #1 on: 18 Sep 2023 at 07:00 »
Looks like an inlet manifold for a DT5/6 ( the carbs were soldered to the manifold!).

  Regards,
               Eddie.

Offline A31ndrew

  • Full Member
  • **
  • Join Date: Oct 2014
  • Posts: 42
  • Location: Bedfordshire
Re: Mystery Douglas Part
« Reply #2 on: 18 Sep 2023 at 07:04 »
Thanks, Eddie. Free to a good home, if anyone has a use for it.
Andrew

Offline Cliffy73

  • Full Member
  • **
  • Join Date: Apr 2020
  • Posts: 44
  • Location: Lincolnshire, UK
Re: Mystery Douglas Part
« Reply #3 on: 18 Sep 2023 at 17:43 »
Hi is this still available?

Offline A31ndrew

  • Full Member
  • **
  • Join Date: Oct 2014
  • Posts: 42
  • Location: Bedfordshire
Re: Mystery Douglas Part
« Reply #4 on: 19 Sep 2023 at 09:59 »
Hi Cliff - it is, I've sent you a private message.