Author Topic: EW 350 gearbox agajn  (Read 1046 times)

0 Members and 1 Guest are viewing this topic.

Offline tealbug

  • Member
  • *
  • Join Date: Mar 2023
  • Posts: 6
  • Location: Bristol, UK
EW 350 gearbox agajn
« on: 07 Apr 2023 at 11:05 »
When I striped my gbox I found a spring about 1" long ih botom of box. is tfis the detent spring? and should there also be a ball bearing on the end as I did not find one,By the way I found an SKF6203 a good replacement fo the bearings in this box.

Offline jimf

  • Member
  • *
  • Join Date: Jun 2021
  • Posts: 19
  • Location: Luton, UK
Re: EW 350 gearbox agajn
« Reply #1 on: 12 Apr 2023 at 17:22 »
why was it jumping out of gear

Offline tealbug

  • Member
  • *
  • Join Date: Mar 2023
  • Posts: 6
  • Location: Bristol, UK
Re: EW 350 gearbox agajn
« Reply #2 on: 13 Apr 2023 at 09:09 »
No a bearing broke up and i am rebuilding but need to know about the detent system.

Offline jimf

  • Member
  • *
  • Join Date: Jun 2021
  • Posts: 19
  • Location: Luton, UK
Re: EW 350 gearbox agajn
« Reply #3 on: 23 Apr 2023 at 17:28 »
let me know what you find out

Offline tealbug

  • Member
  • *
  • Join Date: Mar 2023
  • Posts: 6
  • Location: Bristol, UK
Re: EW 350 gearbox agajn
« Reply #4 on: 24 Apr 2023 at 10:15 »
Still dont know what goes on end of detent spring.

Offline Tazmantic

  • Senior Member
  • ***
  • Join Date: Mar 2020
  • Posts: 241
  • Location: Oxford, UK
Re: EW 350 gearbox agajn
« Reply #5 on: 25 Apr 2023 at 05:23 »
Hi do you have any pics of the box etc see if itís like either of mine then I might be able to help.

Cheers Neil

Offline tealbug

  • Member
  • *
  • Join Date: Mar 2023
  • Posts: 6
  • Location: Bristol, UK
Re: EW 350 gearbox agajn
« Reply #6 on: 25 Apr 2023 at 08:52 »
its a standard RG3459 box.

Offline Tazmantic

  • Senior Member
  • ***
  • Join Date: Mar 2020
  • Posts: 241
  • Location: Oxford, UK
Re: EW 350 gearbox agajn
« Reply #7 on: 06 May 2023 at 20:53 »
Sorry been busy if I get a chance tomorrow Iíll try have a look

Offline Tazmantic

  • Senior Member
  • ***
  • Join Date: Mar 2020
  • Posts: 241
  • Location: Oxford, UK
Re: EW 350 gearbox agajn
« Reply #8 on: 11 May 2023 at 18:47 »
Sorry for the delay the box I have is a RG/H and Iíve attached photos of what mine has for the detent if itís the same as mine and in the gear onto the shaft though my spring could be short.