Author Topic: EW 350 gearbox agajn  (Read 937 times)

0 Members and 1 Guest are viewing this topic.

Offline tealbug

  • Member
  • *
  • Join Date: Mar 2023
  • Posts: 6
  • Location: Bristol, UK
EW 350 gearbox agajn
« on: 07 Apr 2023 at 11:05 »
When I striped my gbox I found a spring about 1" long ih botom of box. is tfis the detent spring? and should there also be a ball bearing on the end as I did not find one,By the way I found an SKF6203 a good replacement fo the bearings in this box.

Offline jimf

  • Member
  • *
  • Join Date: Jun 2021
  • Posts: 19
  • Location: Luton, UK
Re: EW 350 gearbox agajn
« Reply #1 on: 12 Apr 2023 at 17:22 »
why was it jumping out of gear

Offline tealbug

  • Member
  • *
  • Join Date: Mar 2023
  • Posts: 6
  • Location: Bristol, UK
Re: EW 350 gearbox agajn
« Reply #2 on: 13 Apr 2023 at 09:09 »
No a bearing broke up and i am rebuilding but need to know about the detent system.

Offline jimf

  • Member
  • *
  • Join Date: Jun 2021
  • Posts: 19
  • Location: Luton, UK
Re: EW 350 gearbox agajn
« Reply #3 on: 23 Apr 2023 at 17:28 »
let me know what you find out

Offline tealbug

  • Member
  • *
  • Join Date: Mar 2023
  • Posts: 6
  • Location: Bristol, UK
Re: EW 350 gearbox agajn
« Reply #4 on: 24 Apr 2023 at 10:15 »
Still dont know what goes on end of detent spring.

Offline Tazmantic

  • Senior Member
  • ***
  • Join Date: Mar 2020
  • Posts: 241
  • Location: Oxford, UK
Re: EW 350 gearbox agajn
« Reply #5 on: 25 Apr 2023 at 05:23 »
Hi do you have any pics of the box etc see if it’s like either of mine then I might be able to help.

Cheers Neil

Offline tealbug

  • Member
  • *
  • Join Date: Mar 2023
  • Posts: 6
  • Location: Bristol, UK
Re: EW 350 gearbox agajn
« Reply #6 on: 25 Apr 2023 at 08:52 »
its a standard RG3459 box.

Offline Tazmantic

  • Senior Member
  • ***
  • Join Date: Mar 2020
  • Posts: 241
  • Location: Oxford, UK
Re: EW 350 gearbox agajn
« Reply #7 on: 06 May 2023 at 20:53 »
Sorry been busy if I get a chance tomorrow I’ll try have a look

Offline Tazmantic

  • Senior Member
  • ***
  • Join Date: Mar 2020
  • Posts: 241
  • Location: Oxford, UK
Re: EW 350 gearbox agajn
« Reply #8 on: 11 May 2023 at 18:47 »
Sorry for the delay the box I have is a RG/H and I’ve attached photos of what mine has for the detent if it’s the same as mine and in the gear onto the shaft though my spring could be short.

 

motorcycle