Author Topic: EW Clutch Springs  (Read 432 times)

0 Members and 1 Guest are viewing this topic.

Offline DEW

  • Full Member
  • **
  • Join Date: Apr 2022
  • Posts: 23
  • Location: Armidale, NSW, Australia
EW Clutch Springs
« on: 25 Jan 2023 at 09:19 »
My EW clutch won't release unless the springs are totally removed.
From what I can gather the most likely cause is incorrect assembly with a washer being on the wrong way around?
But before I delve into the clutch itself I want to check if the springs I have are correct.

They are 35mm long (one is 32.5...) and they are 12 mm in diameter with a wire section a bit under 2mm. I have no idea what the spring rate is. If anyone can confirm whether these dimensions are correct or not I would be grateful.

 Cheers Dan

Offline DEW

  • Full Member
  • **
  • Join Date: Apr 2022
  • Posts: 23
  • Location: Armidale, NSW, Australia
Re: EW Clutch Springs
« Reply #1 on: 02 Feb 2023 at 06:26 »
All good, its been confirmed that 35mm is correct length so the ones I have are likely correct.