Author Topic: 1930's Douglas T/6  (Read 204 times)

0 Members and 1 Guest are viewing this topic.

Offline cbranni

  • Full Member
  • **
  • Join Date: Nov 2016
  • Posts: 24
  • Location: Swansea
1930's Douglas T/6
« on: 22 Dec 2022 at 19:44 »
Hello,
My name in Colin, I'm from Swansea and I recently bought another Douglas to go with my much loved Dragonfly, this new Douglas is a collection of parts which when assembled should make a very nice 1930's T/6, please see photo below, all these item were bought from a very nice and helpful club member.



Before I start to rebuild this machine I am putting it together loosely to see what fits and what doesn't, which parts are correct or not and it's proving very useful in identifying problems, my first problem is there is no final drive output sprocket from the gearbox, the part number I believe is 9353-1 this is from my 1930 spares book but I have been told it is a later gearbox. I have bought a 19t sprocket with boss to make one but I would like some dimensions before I start, below is a photo of the input/output side of the gearbox



The sprocket has two keyways so if anyone has a sprocket to hand and could take some dimensions or even a few photos I would be very grateful, it's the overall width I require and where the teeth are in relation to this width, I have the shock absorber complete so that's not a problem but I will have to make nuts and locking tabs for both so if anyone has a photo of those again I will be most grateful.

Many thanks for you time, Colin


Images added to forum server - Dave, 23Dec2022
« Last Edit: 23 Dec 2022 at 07:23 by Dave »