Author Topic: Oil pump drive nut  (Read 104 times)

0 Members and 1 Guest are viewing this topic.

Offline Charlie18

  • Full Member
  • **
  • Join Date: Apr 2018
  • Posts: 23
  • Location: Finley australia
Oil pump drive nut
« on: 24 Nov 2021 at 05:38 »
  The progress of restoring a 1926 Douglas EW model is a long process as no doubt many before me have discovered.   I am looking for the drive nut for the oil worm drive . This nut threads onto the timing end of the crank which is a 1/2 inch thread and 20 tpi. The nut on my motor was welded on and had to ground off for removal and hence its damaged  If anyone has a spare available it would be appreciated or even had one made information on the steel would be useful. Attached are photos of the nut.  Cheers Doug

[Attachments converted to linked images. 29Nov21 -Doug, Admin]
« Last Edit: 29 Nov 2021 at 21:47 by Doug »