Author Topic: 250 crankcase breather  (Read 318 times)

0 Members and 1 Guest are viewing this topic.

Offline Parsnips

  • Member
  • *
  • Join Date: Sep 2020
  • Posts: 12
  • Location: South Hants, UK
250 crankcase breather
« on: 08 Sep 2021 at 08:27 »
Can anyone assist me with identifying what is the correct fitting to mate with the holes on the top of the timing gear case in the photo?






[embed image. 08Sep21 -Doug, Admin]
« Last Edit: 08 Sep 2021 at 12:46 by Doug »

Offline Doug

  • Administrator
  • ****
  • Join Date: Mar 2004
  • Posts: 4322
  • Location: Glen Mills, PA, USA
Re: 250 crankcase breather
« Reply #1 on: 08 Sep 2021 at 12:42 »

Offline Parsnips

  • Member
  • *
  • Join Date: Sep 2020
  • Posts: 12
  • Location: South Hants, UK
Re: 250 crankcase breather
« Reply #2 on: 08 Sep 2021 at 13:11 »
Many thanks Doug, it shouldn't be too difficult to make up something similar. You have also answered something else that has been puzzling me - how the primary covered is fixed is also shown in your photo.
Thanks again, Mark

Offline Tazmantic

  • Full Member
  • **
  • Join Date: Mar 2020
  • Posts: 145
  • Location: Oxford, UK
Re: 250 crankcase breather
« Reply #3 on: 13 Oct 2021 at 18:12 »
Nice to see another 250 owner, I made one for mine out of some steel square section and some copper pipe.

 

motorcycle