Author Topic: Dragonfly headlamp  (Read 126 times)

0 Members and 1 Guest are viewing this topic.

Offline Biggles1957

  • Member
  • *
  • Join Date: Dec 2020
  • Posts: 19
  • Location: Leicestershire, UK
Dragonfly headlamp
« on: 03 May 2021 at 14:02 »
Having just acquired my Dragonfly I need to investigate the headlamp as it's extremely dim.  How do you get at it?  I haven't actually investigated yet but thought it would be good idea to ask before I start undoing screws etc!

Offline eddie

  • Master Member
  • ****
  • Join Date: Mar 2006
  • Posts: 1662
  • Location: Hampshire, UK
Re: Dragonfly headlamp
« Reply #1 on: 03 May 2021 at 14:29 »
If you still have the original Miller headlight rim, there is a single retaining screw underneath the headlamp. Undo this screw, pull the bottom of the rim forward, then un-hook it from the top of the nacelle. This screw should have a short spring on it - to make it possible to adjust the height of the headlight beam. If all the lights appear to be dim, make sure you have a good earth - a faulty earth will result in that connection being made through other units (effectively halving the available voltage). A quick check can be made with a length of flex to connect the shell of the headlight unit with the engine crankcase - if you have a poor earth, the extra wire will vastly improve the light output. When I rebuilt my Dragonfly, I included an extra earth wire in the loom to guard against such problems (they can often be traced to the use of 2 pack paint - it is a much better insulator than the old Cellulose paint!).

  Regards,
                 Eddie.

 

motorcycle