Author Topic: 1924 CW Clutch  (Read 812 times)

0 Members and 1 Guest are viewing this topic.

Offline Alan

  • Senior Member
  • ***
  • Join Date: Apr 2004
  • Posts: 166
  • Location: Australia
1924 CW Clutch
« on: 03 Oct 2020 at 02:57 »
My clutch does not want to operate smoothly and with minimal spring pressure locks up. It looks like the operating cam is pushing onto the top of the pressure plate ( no 1/16 in clearance ) and maybe not enough pressure on the top of the radial bearing as also required in the manual. Would this indicate that the pressure plate requires re-lining to achieve this gap and what is the recommended thickness for the new material.
Many thanks Alan.....