Author Topic: Splined Brake Drum  (Read 286 times)

0 Members and 1 Guest are viewing this topic.

Offline Rob

  • Full Member
  • **
  • Join Date: Jan 2006
  • Posts: 77
  • Location: Melbourne, Australia
Splined Brake Drum
« on: 03 Aug 2020 at 00:44 »


I am in need of a splined brake drum for an EW hub. Any help or leads would be appreciated.

Rob


Offline Dads bike

  • Full Member
  • **
  • Join Date: Jul 2020
  • Posts: 75
  • Location: Norfolk, UK
Re: Splined Brake Drum
« Reply #1 on: 26 Aug 2020 at 12:19 »
Hi Rob
  Dont know if this is of any use to you, take a look at the pic
Basically it is the front cast iron drum from a 30s machine, that was, I was told, machined down to fit an early machine?
Dimensions are
OD 8 3/4 Inc fins
ID 8 (braking surface)
Depth of breaking surface 1
The tapered spline is in good order and no cracks to the casting.
The two holes in the back plate are a long story but in short can be easily plugged, I used this item to have some new ones cast and machined to the correct size for my Aeros.
Let me know if its of any use and we will go from there
Regards
 Steve.

Offline Cliffy73

  • Member
  • *
  • Join Date: Apr 2020
  • Posts: 11
  • Location: Lincolnshire, UK
Re: Splined Brake Drum
« Reply #2 on: 29 Aug 2020 at 12:31 »
Hi if the gent doesn't have the brake drum I'm interested in it for my Aero. Cheers Chris

Offline Rob

  • Full Member
  • **
  • Join Date: Jan 2006
  • Posts: 77
  • Location: Melbourne, Australia
Re: Splined Brake Drum
« Reply #3 on: 30 Aug 2020 at 04:29 »
Chris,

I have decided not to take up Steve kind offer.

Rob