Author Topic: Petrol tank screws for 2 3/4hp. Whitworth 7/32 x 24 tpi.  (Read 281 times)

0 Members and 1 Guest are viewing this topic.

Offline lovejoy

  • Member
  • *
  • Join Date: Jul 2016
  • Posts: 10
  • Location: uk
Hi All, Does anyone know where I can get Screws for suspending tank from the frame. They are Whitworth 7/32 x 24 tpi. (90 degree Raised Countersunk Head Screws)

Any information would be helpful.

Regards Martin

Offline GlenDouglas

  • Full Member
  • **
  • Join Date: May 2016
  • Posts: 33
  • Location: Lincoln
Re: Petrol tank screws for 2 3/4hp. Whitworth 7/32 x 24 tpi.
« Reply #1 on: 09 Sep 2019 at 20:29 »
Hi not sure if the Douglas club have any. If you need temporary screws, Drum Tension Rod 7/32 25mm long 10 Pieces on ebay work real well.

Regards Glen

Offline Doug

  • Global Moderator
  • ****
  • Join Date: Mar 2004
  • Posts: 3532
  • Location: Pennsylvania, USA
Re: Petrol tank screws for 2 3/4hp. Whitworth 7/32 x 24 tpi.
« Reply #2 on: 09 Sep 2019 at 21:38 »
Martin,

I have these in heat treated stainless steel at $3 each. Though if the LDMCC has them, likely it will be cheaper from them. They were also used on the small DT airbox, which is what I make them for.

-Doug