Author Topic: Side stand for E28 / EW600  (Read 476 times)

0 Members and 1 Guest are viewing this topic.

Offline Ian

  • Master Member
  • ****
  • Join Date: Jul 2004
  • Posts: 1264
  • Location: The Oaks, NSW, Australia
Side stand for E28 / EW600
« on: 26 May 2019 at 01:25 »
I am looking at setting up a side stand for my 600 so I can use it while going through some medical issues. Has anyone done this ? Any ideas welcome as to how best to achieve.

Offline OCTypeCanada

  • Full Member
  • **
  • Join Date: Oct 2012
  • Posts: 43
  • Location: Calgary, Canada
Re: Side stand for E28 / EW600
« Reply #1 on: 26 May 2019 at 13:11 »
A little pricey perhaps but here is a link to Vintele side stands meant for vintage bikes: http://www.vintele.co.uk/prices-contact/ 

Offline Ian

  • Master Member
  • ****
  • Join Date: Jul 2004
  • Posts: 1264
  • Location: The Oaks, NSW, Australia
Re: Side stand for E28 / EW600
« Reply #2 on: 26 May 2019 at 21:43 »
That looks interesting. Wonder how it would work in withe the footboard location.

Offline OCTypeCanada

  • Full Member
  • **
  • Join Date: Oct 2012
  • Posts: 43
  • Location: Calgary, Canada
Re: Side stand for E28 / EW600
« Reply #3 on: 26 May 2019 at 22:15 »
I think it may fit further back than the foot boards.

Offline Bert

  • Full Member
  • **
  • Join Date: Nov 2014
  • Posts: 50
  • Location: Adelaide
Re: Side stand for E28 / EW600
« Reply #4 on: 27 May 2019 at 00:32 »
Hi Ian,
Not sure of the frame set up of an EW but my T6 had this arrangement when I bought it. It works quite well. There is a long spring through the sidecar mount tube which keeps light tension on the stand. I lean down, pull the stand free from the short spigot hole and it drops down. The bike is quite stable on Flat ground.

Offline Ian

  • Master Member
  • ****
  • Join Date: Jul 2004
  • Posts: 1264
  • Location: The Oaks, NSW, Australia
Re: Side stand for E28 / EW600
« Reply #5 on: 27 May 2019 at 02:34 »
That looks simple !

 

motorcycle