Author Topic: Dragonfly front hub  (Read 861 times)

0 Members and 1 Guest are viewing this topic.

Offline Bynorthsea

  • Full Member
  • **
  • Join Date: Jun 2018
  • Posts: 33
  • Location: United Kingdom
Dragonfly front hub
« on: 28 Aug 2018 at 18:17 »
Trying to sort out the front hub on my project, threads on hollow spindle damaged and nut clamping brake plate missing.  I was concerned about damaging the thin ends when knocking out spindle and bearing but I've been successful to a point. Looking at the parts drawings there appears to be a separate spacer to position the brake plate and a steel bush, on the assembly I have removed it looks like one part and the whole appears siezed on the hollow spindle. I'd appreciate any advice as to what I have an how to safely separate the parts.