Douglas - For Sale Items

Douglas 1913 Model P motorcycle

Douglas - Wanted Items

Douglas 1915 3 Spd-Gearbox and Clutch

Support & How to Join

Side Panel Notices

Quick Comments

Reminders, links to interesting topics, bump your own topic, quick comments or any short message of interest to members. Try it out!
Please note - 500 character current limit


Dave

Yesterday at 00:09:46
Welcome to the new site!

Recommended viewing for a fast start...
 - Quick Tour of the Front Page
 - Quick Tour of the new Attachments

More info in my post here.

CW Clutch Mechanism

Started by McKaige, 30 Jun 2014 at 07:06

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

McKaige

 Greetings,
I'm trying to come to terms with the clutch mechanism on my CW.
Could someone please let me know the correct procedure for reassembly or is there and documentation about on reassembly.
I'm not quite sure what role the slightly flanged plate plays and where it fits in the scheme of things. My clutch was seized but have manage to free things up and  replaced the linings. When it came apart I wasn't expecting balls to go everywhere and four springs ending up under the workbench!
Cheers
Chester McKaige :oops.

Doug

Chester,

The indicated washer spans the face of the backing plate with the lip facing outward. It gives a surface for the inboard end of the clutch springs to sit upon. the slight lip prevents the ends of the springs from working their way outward due to centrifugal force and possible binding in the holes where they pass through the flywheel.

There are probably some section views of the CW/SW clutch about. All the ones I have seem to be of the slightly later EW style. There are other pictures of CW/SW clutch components shown here on the Forum, but all fully disassembled, such as yours.

-Doug

McKaige

Thanks Doug and Ian for putting me right in regards to the offending lipped washer. I have located its correct home and all is good again. The funny thing was that it fell on the ground after I had extracted the flywheel off its shaft so it was definitely in the wrong place that caused much head scratching trying to work out how it could possibly do anything in the position that it was in. Just goes to show how wonderful these Forums are for silly old buggers like me!!!
Cheers
C

Alan

Chester...I would recommend purchasing from the LDMCC a manual entitled ( on the front page).....
The Handbook of the Douglas Motor Cycle    ( bottom left) 2 ¾ HP..

About 27 pages and has a detailed section on the use, assembly and maintenance of the flywheel clutch...

Hutch

Section view of the flywheel clutch from page 58 of the 1925 "The Handbook of the Douglas Motorcycle 2 3/4 H.P". If you need the text to go with it Chester, please PM me.

Cheers

ian

oil baron

If you are intersted a copy of the same manual can be viewed on the barnstormers.co.nz site
Cheers SteveL
Steve L

McKaige

Thank you all. Everything now sorted.
Cheers