Author Topic: Grease fitting question  (Read 1930 times)

0 Members and 1 Guest are viewing this topic.

Offline Jeffbo1

  • Full Member
  • **
  • Join Date: Oct 2012
  • Posts: 47
  • Location: Northwestern Washington State, USA
Grease fitting question
« on: 11 Feb 2013 at 20:48 »
My Mk-5 has what look like small grease nipples throughout the chassis none of which will fit my modern grease owners change these fittings for more modern type or is there a special gun or fitting to match these old grease nipples...don't know if it matters to originality but if need be I would be interested in finding the proper gun that must have been included with the bike originally...any thoughts would be appreciated....Jeff

Offline Black Sheep

  • Full Member
  • **
  • Join Date: Jan 2012
  • Posts: 115
  • Location: South Lanarkshire
Re: Grease fitting question
« Reply #1 on: 12 Feb 2013 at 07:38 »
The brass Tecalemit grease guns (often seen on eBay) do the job. I must confess to using replacement modern grease nipples on occasion. I shall just go and beat myself with birch twigs.