Author Topic: Ew350  (Read 378 times)

0 Members and 1 Guest are viewing this topic.

Offline Neilj

  • Full Member
  • **
  • Join Date: May 2021
  • Posts: 39
  • Location: Newport, UK
Ew350
« on: 08 Jun 2021 at 05:45 »
Can anyone recommend an engineering company to bore my cylinders.blind bore as I do not have removable heads.Thanks Neil

Offline hartleys1

  • Full Member
  • **
  • Join Date: Aug 2017
  • Posts: 34
  • Location: bradford west yorkshire ukm
Re: Ew350
« Reply #1 on: 08 Jun 2021 at 12:05 »
 Neilj
Try SEP (service exchange parts) Kegworth 01509 673295.
If you have'nt got oversize pistons you will have to source some.
search the posts,various modern pistons have been used.
I have used JP pistons (Australia) in my sports but it has detachable heads.
I have no conection with SEP other than being a satisfyed customer, but they
can be a bit slow on turn round
Regards Keith

Offline yosemite

  • Full Member
  • **
  • Join Date: Aug 2017
  • Posts: 44
  • Location: kelso united kingdom
Re: Ew350
« Reply #2 on: 08 Jun 2021 at 20:59 »
Also used SEP for a few jobs, regrinding an A65 bottom end and welding and grinding back to original size a  6 cylinder  japanese crank, both jobs were excellently done but as keith says they can have a slow turnaround, probably because they're so busy perhaps that in itself could be used as a  recommendation
Paul