Author Topic: 1927 EW350 rearstand & footbrake pedal  (Read 2948 times)

0 Members and 1 Guest are viewing this topic.

Offline oily bloke

  • Senior Member
  • ***
  • Join Date: Mar 2009
  • Posts: 219
  • Location: Surrey. UK
1927 EW350 rearstand & footbrake pedal
« on: 05 Nov 2010 at 17:36 »
Hi all,
Does anyone have a drawing and/or dimensions of the above items so I can make them please.
Thanks
Andy

Offline kmd

  • Full Member
  • **
  • Join Date: Mar 2008
  • Posts: 60
  • Location: Hampshire
Re: 1927 EW350 rearstand & footbrake pedal
« Reply #1 on: 05 Nov 2010 at 17:50 »
Hi Andy

The LDMCC have stands for 2 3/4 and 4hp  if you can get the size we can bring them along to the next club night
To see if the match.

Regards
Kevin

Offline oily bloke

  • Senior Member
  • ***
  • Join Date: Mar 2009
  • Posts: 219
  • Location: Surrey. UK
Re: 1927 EW350 rearstand & footbrake pedal
« Reply #2 on: 05 Nov 2010 at 18:36 »
Thanks Kevin. Lets hope someone comes up with the sizes.
Andy.

Offline Chris

  • Master Member
  • ****
  • Join Date: Jun 2004
  • Posts: 507
  • Location: Kent, UK.
Re: 1927 EW350 rearstand & footbrake pedal
« Reply #3 on: 05 Nov 2010 at 19:40 »
Hi Andy
       The stands for 2.3/4 hp are not a good match for the EW but they can be converted and it is easier to do this than to manufacture from scratch.. In the past they have been supplied for this purpose. Chris.

Offline MRD

  • Full Member
  • **
  • Join Date: Oct 2007
  • Posts: 145
  • Location: Hants. U.K.
Re: 1927 EW350 rearstand & footbrake pedal
« Reply #4 on: 05 Nov 2010 at 21:04 »
Hi Andy
I have a rear stand in my workshop which may be a EW rear stand, Its not the best but might be usefull as a pattern
If you email me near the time of club night, I'll try and bring it along
Regards        Martin