Author Topic: Brake drums  (Read 2742 times)

0 Members and 1 Guest are viewing this topic.

Offline Edin

  • Full Member
  • **
  • Join Date: Oct 2006
  • Posts: 90
  • Location: Denmark
Brake drums
« on: 08 Oct 2010 at 15:17 »
Hej all.
Brake drums with conical splines are out of stock here in DK.
Even as scrap (with useable splines) is it impossible to get some,- they have all been used,- weldet in partly
new drums.
The problem seems to be the same other places in the world.
In Denmark we decided to make a small batch of 3 new drums,- the job is done and the result is well.
Drawings of brake drums is not available,- but there is a drawing af the hub (from Doug 18 years ago) this
drawing was usefull,- as it shows,- conical angle,- numbers of splines and angle of splines. This drawing can be
obtained from me.
To show the whole proces is a fotoserie enclosed
Regards Edin DK





























« Last Edit: 08 Oct 2010 at 20:05 by Dave »

Offline Dave

  • Administrator
  • ****
  • Join Date: Mar 2004
  • Posts: 3898
  • Location: Australia
Re: Brake drums
« Reply #1 on: 08 Oct 2010 at 20:07 »
Photos added. Thanks Edin.

Offline BARRYM

  • Member
  • *
  • Join Date: Aug 2010
  • Posts: 16
  • Location: East Sussex. U.K
Re: Brake drums
« Reply #2 on: 09 Oct 2010 at 18:55 »
Edin, Congratulations people like you amaze me, the splendid effort you will go to. The brake drum project was obviously not an easy one, but what a success it has been.
This spurs me on to have a go at my own "brick wall" I have come up against, that is making a new camshaft for my SW5. BARRYM

 

motorcycle