Author Topic: Endeavour information required  (Read 3161 times)

0 Members and 1 Guest are viewing this topic.

Offline Endeavor

  • Member
  • *
  • Join Date: Apr 2009
  • Posts: 19
Endeavour information required
« on: 23 Sep 2009 at 01:46 »
Hello

Could some one inform me off the following for the Douglas Endeavor.

Original spark plug brand and type

Ignition timing

Valve timing inlet and exhaust and clearances

Magneto label spec's

Cheers Alastair




Offline rpf94

  • Member
  • *
  • Join Date: Feb 2009
  • Posts: 9
Re: Endeavour information required
« Reply #1 on: 26 Sep 2009 at 10:41 »
Alastair
 I ALLWAYS USED LODGE C3 BUT I DONT KNOW WHAT THE FACTORY FITTED.
ALSO THE MAGNETO IS PROBABLY TO EARLY TO HAVE A BADGE IN IT. ITS MORE LIKLY STAMPED IN THE SHELL
ANY mid 1930s LUCAS MAGDYNO SHOULD BE OK USUALLY ITS ONLY THE END PLATE AND GEAR THATS DIFFERANT
in fact theres a possible 1 on ebay now, sorry bought the caps didnt notice
RPF     :roll: :roll: :roll:
« Last Edit: 26 Sep 2009 at 15:22 by rpf94 »
gmt380

Offline Endeavor

  • Member
  • *
  • Join Date: Apr 2009
  • Posts: 19
Re: Endeavour information required
« Reply #2 on: 28 Sep 2009 at 02:45 »
Alastair
 I ALLWAYS USED LODGE C3 BUT I DONT KNOW WHAT THE FACTORY FITTED.
ALSO THE MAGNETO IS PROBABLY TO EARLY TO HAVE A BADGE IN IT. ITS MORE LIKLY STAMPED IN THE SHELL
ANY mid 1930s LUCAS MAGDYNO SHOULD BE OK USUALLY ITS ONLY THE END PLATE AND GEAR THATS DIFFERANT
in fact theres a possible 1 on ebay now, sorry bought the caps didnt notice
RPF     :roll: :roll: :roll:

Thanks for that mine has AC86 plugs in it and I have had it running,

 

motorcycle