Author Topic: clutch reline  (Read 4953 times)

0 Members and 1 Guest are viewing this topic.

Offline bazza

  • Full Member
  • **
  • Join Date: Mar 2007
  • Posts: 134
  • Location: Branxholm North East Tasmania AUSTRALIA
clutch reline
« on: 25 Jun 2007 at 01:22 »
Hi Can anyone advise thickness of material for clutch reline on an EW.

Regards Bazza

Offline Stuart Lister

  • Full Member
  • **
  • Join Date: May 2004
  • Posts: 60
  • Location: UK (East Yorks)
Re: clutch reline
« Reply #1 on: 30 Jun 2007 at 16:46 »
Hi Bazza,

I just measured mine, which has only done a couple of hundred miles since it was relined. The total thickness is 8.5mm. That's 2mm of spring steel with 3.25mm of friction material on both sides.

Hope this helps,

Stuart.

Offline bazza

  • Full Member
  • **
  • Join Date: Mar 2007
  • Posts: 134
  • Location: Branxholm North East Tasmania AUSTRALIA
Re: clutch reline
« Reply #2 on: 30 Jun 2007 at 23:51 »
Hi Stuart,Thanks for that very helpful.

Bazza