« previous next »
Pages: 1

Author Topic: Mk3S 1948 spoke lengths  (Read 5226 times)

0 Members and 1 Guest are viewing this topic.

Offline pjondeck

  • Senior Member
  • ***
  • Join Date: Jul 2006
  • Posts: 160
  • Location: Canberra Australia
Mk3S 1948 spoke lengths
« on: 19 Dec 2006 at 05:23 »
Does anyone have information about the spoke lengths for this machine please. I have the part numbers but the lengths would be helpful. Many thanks.
Peter

Edit 09/01/2007...
Peter also requires the wheels (front and back) offset dimensions if any one can provide this information. The information is required urgently as Peter wishes to have his bike ready to ride in the Australian Centenary Rally in April.

Alwyn
« Last Edit: 09 Jan 2007 at 06:50 by alwyn »
Logged

Offline alwyn

  • 1928 - 2009
  • Co-Founder
  • ****
  • Join Date: Mar 2004
  • Posts: 1758
  • Location: Late of Encounter Bay, South Coast, South Australia
Re: Mk3S 1948 spoke lengths
« Reply #1 on: 09 Jan 2007 at 06:58 »
Can anyone provide the above information for Peter? - the information is required urgently as Peter wishes to complete the restoration so he can ride the bike in the Centenary Rally in April.

Alwyn
Logged
Quotable Quote - "640 k should be enough for anybody"! - Bill Gates - 1981.

Offline eddie

  • Master Member
  • ****
  • Join Date: Mar 2006
  • Posts: 1851
  • Location: Hampshire, UK
Re: Mk3S 1948 spoke lengths
« Reply #2 on: 09 Jan 2007 at 10:23 »
Hi Peter (and Alwyn),
                                 I have just checked through the sample spokes that we hold and the details are as follows (all lengths are measured from inside of bend to end of spoke):
                      27113             8-3/4" x  80 degree
                      27114             6-1/2" x  80 degree
                      37944             8-3/4" x 100 degree
                      37945             6-1/4" x 100 degree

                      27022             8-3/8" x  80 degree
                      27023             8-3/8" x 100 degree
                      37946             8-1/4"    x  90 degree   ***


           All spokes are 9g.

       Regarding the offsets for the wheels:

   Rear wheel - from speedo drive end of hub to centre of rim is 3" ***
   Front wheel - from face of brake drum to centre of rim is 1-5/16"*** (face of brake drum lines up with side of original WM2 rim)

  *** these dimensions were taken from my own wheels as we do not have any official sizes/dimensions for them.

    Hopefully this will help with your restoration,
                               Regards,
                                      Eddie.

[replace special format fractional characters with standard text. 10Apr20 Doug, site moderator]
« Last Edit: 10 Apr 2020 at 21:05 by Doug »
Logged

Offline pjondeck

  • Senior Member
  • ***
  • Join Date: Jul 2006
  • Posts: 160
  • Location: Canberra Australia
Re: Mk3S 1948 spoke lengths
« Reply #3 on: 09 Jan 2007 at 10:55 »
Hi Eddie and Alwyn
I am most grateful for your response to my query. I have emailed the info to my "wheel man" and despatched the wheels today for lacing. I am fairly confident of being ready for the Centenary Rally.
Once again thanks heaps.
Peter
Logged
Pages: 1
« previous next »