Douglasmotorcycles.net

Advertising and Classifieds => Douglas Motorcycles and Parts For Sale - Private => Topic started by: Eric S on 19 Nov 2018 at 19:51

Title: Aero 600 head bolts
Post by: Eric S on 19 Nov 2018 at 19:51
I am about to have 5/16-18 W bolts for a 600 Aero's engine heads manufactures.
Anybody else interested to share costs?
Title: Re: Aero 600 head bolts
Post by: Eric S on 22 Nov 2018 at 07:08
Well nobody is interested at this time and it is not cost effective to have a single set made so I'll give up for now.
Title: Re: Aero 600 head bolts
Post by: eddie on 22 Nov 2018 at 09:59
If standard 5/16" - 18 Whitworth bolts or set screws would be acceptable, try Namricks, 124 Portland Road, Hove, Sussex BN3 5QL - they have them listed on their website - unfortunately, anything Whitworth or BSF tends to be expensive these days.

  Eddie.
Title: Re: Aero 600 head bolts
Post by: Eric S on 22 Nov 2018 at 15:26
Eddie

effectively I found standard Whitworth bolts from Custom Fasteners in UK.
Now I have to decide if I want to keep 1 cylinder with correct bolts and be 50% correct or change both cylinders to have the same heads but 100% uncorrect but with a similar look on both ...