Douglasmotorcycles.net
General => General Douglas Discussion => Topic started by: patrickhowell on 11 Jul 2015 at 15:00
-
Can anyone post pictures of an original carb heat pipe for the above, with dimensions, please? Mine is missing, and my toolmaker friend needs these . Thanks
-
You mean the one that is easily made from a small exhaust pipe?
-
The pipe which goes from the carb to just above the rear cylinder.
-
Thats it I think I used a length of tiger cub exhaust pipe with a cast clip
-
Thats it I think I used a length of tiger cub exhaust pipe with a cast clip
-
Can be formed using a plumbers bending spring out of a piece of 22mm copper pipe which you can anneal and flare at the end. I made mine that way. A spring will cost you about £4 and 2m of copper pipe about £7 assuming you cannot find an off cut.
-
Patrick,
here 2 pictures showing the pipe.
Hope it help, otherwise can make some photos of mine.
Greetings Rudolf
-
does any one know where to get the collar that screws the air intake pipe to the carb from please? david