Douglasmotorcycles.net
General => General Douglas Discussion => Topic started by: douglas1947 on 15 Apr 2015 at 16:50
-
I would like to make a replica Pannier Frame (Part No SA. 2800).
There was one fitted to my bike (I have an old photo), when it was new, but now itīs gone.
I need the width of the frame, the other details I can get from the photo.
I hope, someone has an original and can help with a measure.
May thanks
Michael
Sorry Photo donīt work as attachment, seems too big!
-
Hi I have 2 PDF drawings of the T35 Pannier frame
Note the Tube size is NOT Correct should be 0.500 inch Diameter
Dave
(https://www.douglasmotorcycles.net/aa-files/images/handgun/2015/Pats_drawing_of_the_douglas_rear_rack_1.jpg)
larger PDF version (https://www.douglasmotorcycles.net/aa-files/images/handgun/2015/Pats_drawing_of_the_douglas_rear_rack_1.pdf)
[Attachments converted to linked files. 13Dec21 -Doug, Admin]
-
Drawing number 2
If you need anymore details PM me and I can check my one
regards
Dave
(https://www.douglasmotorcycles.net/aa-files/images/handgun/2015/SAM_0380.jpg)
[PDF converted to linked image. 13Dec21 -Doug, Admin]
-
Hi,
According to the parts book, the pannier frame SA2800 was only available for the Mk 4, Mk 4 Sports or Mk 5. The bottom mounting points bolt to the pillion footrests on the cast alloy toolboxes, so is not suitable for the earlier Mk 1 and 3 models.
Regards,
Eddie.
-
Hi Dave,
thanks for sending the drawings.
The first one is the rack, showing on the photo of the 90+ when it was new !!!
So I will get the right tubes and make one for my bike.
Do you have also fitted a rack on yours?
Michael
-
Thanks for help;
the rack is made and ready to spray!!!
Michael