Douglasmotorcycles.net
Advertising and Classifieds => Douglas Motorcycles and Parts Wanted - Private => Topic started by: Holdenrc on 25 Mar 2005 at 08:40
-
Hi
I'm after some parts for my '14 Douglas: handle bars & leavers, rear stand, brake leaver with rods & foot rest. I have some 24 parts for trade or sale and a nearly complete 26 that I'm going to part with.
Thanks
Russell Holden
Mudgee, Australia
-
Hi Russell,
It might be an idea to list the parts and the complete 26 for sale in a separate post in the For Sale (https://www.douglasmotorcycles.net/index.php?board=3.0)section?
And if you would like to email some photos of the parts, the complete 26, or both to the address shown in this topic (https://www.douglasmotorcycles.net/index.php?topic=8594.0), I'll be happy to add them to your post(s).
Dave
Updated details for emailing photos - Dave, 11Feb2021
-
Hi Russel
What model 1914 Douglas do you own? Most of the models of that era have footboards rather than pegs, so possibly this is what you are seeking?
Cheers, Graeme
-
Hi Russell from another Russell.
I am interested in what parts you have which may suit my incomplete 1925TS, and may be interested in the 26 if it helps me complete a bike out of two. What I need is handlebars and all levers (like you) front axle, belt drive pulley, front brake assembly and tank mounting bolts and fuel filler cap. Is there a number I can ring you on to discuss. Also what specifically do you need and I'll keep an eye out as there's a swap coming up soon down here.
Russell Medhurst
-
Hi Russell
I have some of the bits you need (handle bars etc) I have cheaked the #'s on the spare motors (6 of them) most are 1924 one 1926. I have a few with the flywheel clutch and one in particular that has a centrifical advance built into the side of the cover running off the maggie gear. I also have several spare frames mostly 1925 and gear boxes, guards etc. After checking the frame & motor #'s I have a 90% complete 1924 for sale and about 80% of a 25 which I am also going to sell
I need for my 1914:
Clutch leavers that fit on the out side of the gear box to operate the cone clutch.
Foot boards x 2
Brake peddel
Front brake assembly
Handle bars
Rear stand
I'm located in Mudgee NSW
02 63 73 1416
Any help is greatly appericated
-
I see in the latest New Conrod that the LDMCC is having front and rear stands made up to suit the 2 3/4 models (and for 3 1/2, 4hp)
Hope this helps! Cheers, Graeme