Douglasmotorcycles.net

General => Douglas Motorcycles - General Discussion => Topic started by: Ian on 11 Nov 2010 at 05:12

Title: Replacing sprockets on flywheel clutch
Post by: Ian on 11 Nov 2010 at 05:12
On my new EW600 the engine sprocket is very worn. How does one go about replacing these given they are an integral part of the clutch ? Normally I would just weld on a new one but seems to me as though there is not enough metal there to do that.
Title: Re: Replacing sprockets on flywheel clutch
Post by: Jonathan on 10 Aug 2020 at 11:40
Can anyone offer advice on replacing the sprocket, as I too need to replace  the sprocket on my s/t6 project clutch.
Title: Re: Replacing sprockets on flywheel clutch
Post by: Daren W Australia on 03 Aug 2021 at 10:22
Hi I have been looking at sprockets today try these guys www.buyoldengineering.com they seem to have alot of Douglas stuff Ta Daren
Title: Re: Replacing sprockets on flywheel clutch
Post by: franky on 03 Aug 2021 at 13:00
Bought a set for my CW. I did have them nickel plated but not polished prior to fitting.

(https://www.douglasmotorcycles.net/aa-files/images/franky/2021/douglas-sprockets-packaging-900.jpg)

Image converted to linked file - Dave,14Aug2021