Expressions of interest are sought for a collection of 2 3/4 parts. Include 1913 engine, 1915 engine, 1920's frames, carriers, barrels, cranks and cases, toolbox's a seat (rusty), a swirl type exhaust pipe with a trace of original chrome, a couple of tanks one with original paint. Not sure of exact amount of everything as I've just started sorting it all out. There are also a pair of early (20's) overhead valve heads with valves,one set of tappets and 2 oilers, although one has the tappet carrier broken off at the head. A clean break that could be easily repaired by a competent welder. There is a complete 1932 OHV 500 although its stripped down with a broken crank, the paint etc is in good condition. There is also a Dragonfly, although stripped down I believe it's complete, with very good paint and I think new exhaust pipes. Every thing is for sale, please see my other adds with photo's. Thanks.
ernie
kevin here from the gold coast..
any chance of an EW petrol tank...mudguards?? primary chain cover?? throttle lever
I'd be interested in the 1912 engine as I have a 1912 with a dodgy 1919 engine also looking for a gearbox sprocket
Thanks
Chris Mac
Hi Bernie
If the tanks and carriers are still available I'll gladly purchase these of you.
Cheers
Chris
Hi Bernie im currently trying to restore a 1927 350 EW and would be interested in any parts you have for that model in particular brake backing plates intake manifold exhaust system fuel tank caps primer cover and oil and fuel lines Thanks Simon in south oz
Hi, I'm going to attempt to upload some photo's of some of the stuff from Dad's (Jack Kennington) estate. I'm sorry if I havn't answered some of your messages, I'm a bit overwhelmed by the response and when trying to reply from my phone, they've gone to the administrator instead. So please view the photo's and I'll do my best to answer any questions
Bernie
(https://www.douglasmotorcycles.net/aa-files/images/bernie/2014/2-3-4-parts-32-OHV/Grangpops-OHV-900.jpg)
(https://www.douglasmotorcycles.net/aa-files/images/bernie/2014/2-3-4-parts-32-OHV/IMG_1740-900.JPG)
(https://www.douglasmotorcycles.net/aa-files/images/bernie/2014/2-3-4-parts-32-OHV/IMG_1741-900.JPG)
(https://www.douglasmotorcycles.net/aa-files/images/bernie/2014/2-3-4-parts-32-OHV/IMG_1742-900.JPG)
(https://www.douglasmotorcycles.net/aa-files/images/bernie/2014/2-3-4-parts-32-OHV/IMG_1743-900.JPG)
(https://www.douglasmotorcycles.net/aa-files/images/bernie/2014/2-3-4-parts-32-OHV/IMG_1744-900.JPG)
(https://www.douglasmotorcycles.net/aa-files/images/bernie/2014/2-3-4-parts-32-OHV/IMG_1745-900.JPG)
(https://www.douglasmotorcycles.net/aa-files/images/bernie/2014/2-3-4-parts-32-OHV/IMG_1746-900.JPG)
(https://www.douglasmotorcycles.net/aa-files/images/bernie/2014/2-3-4-parts-32-OHV/IMG_1747-900.JPG)
(https://www.douglasmotorcycles.net/aa-files/images/bernie/2014/2-3-4-parts-32-OHV/IMG_1748-900.JPG)
(https://www.douglasmotorcycles.net/aa-files/images/bernie/2014/2-3-4-parts-32-OHV/IMG_1751-900.JPG)
Hi,
I'm doing a 1924 TS and would be interested in the seat, mudguards if you have them, sprocket for a gearbox, and any footbrake parts please?
Regards,
Stephen
Hi Stephen, which seat are you after, There are 2 seat pans in quite good condition and a sprung frame (quite rusty but salvageable) for a leather saddle. No mudguards and I havn't found any sprockets or foot brake parts yet. If you can send me your email I can send you a photo of the seats, There is already some interest in the Pans.
Regards, Bernard
Hi, Bernie
I'm wandering if the rear chainguard that is on one of the pictures placed on the backrack of the 350 is available ( this would be very helpfull on the restauration of my S6), and also if the batterycarrier ,the saddle cover and the rear mudguard of the same bike are for sale.
Regards.
Sven
Hi Bernie,
I tried to PM you. Did you get it?
Had a short message from Bernie saying he was in hospital having surgery after a spider bite, but he expects to be back on deck in a day or two.
Thanks for letting us know. Hope he gets better soon.
Hi I am looking for a saddle type fuel tank looks the same as the tank in the pictures twin caps
Could you let me know if you have one .
Many thanks
Kavat
Hi Kavat, only the tank on the bike and it must go with it, thanks
Hio Bernie, do you still have the rear rack and tool boxes/bags?
Cheers Spider
Hi Spider, If you mean the carrier and tool box's on the B32, they go with the bike. I mean to start another add with better photo's of the B32 and parts.
Berny, i ma interested in a complete engine (with gearbox), between 1915 and 1928. Do you have any of this? And how much it cost in US dollar?
Excuse me for my English, I am waiting your respond.
best regards from Argentina.
Hernan.
Hello Bernie
I am thinking if you have any conrods to my 1914 23/4 model U?
Regards Veikko
Hi Berni, we are currently restore a DT 5 engine 600 ccm and are in need of the following parts:
1. Worm drive shaft of the oil pump, which is unfortunately missing in the engine
2. Crank shaft , the one we have is in bad condition
3. Two connecting rods, are the reproductions available?
4. Air filter box
5. 1 lubrication oiler
6. Flywheel with good conus
7. At the rear brake: knee leaver or toggle clamp
Any help with parts or information who might have such parts wound be very helpful for us! :)
Thank you very much for your help! Regards Christoph
hi
I am interested in the 1913 and 1915 engine and the four cylinder heads.
If available please quote the price for shipping in India
Thanks
Rakesh Jain
Very sorry Rakesh, the engines have been sold. I have some cylinders left what ones are you wanting?
Bernie
pm sent...
hello I am looking for a 1924 belt drive frame and a set of handle bars also a timing cover and 2 front cylinders and pistons ?
yours carl denton .
Hi Berniw,
Is the compleate ohv bike (with dismantled engine) still available, if so can you give me an indication of the asking price please?
Thanks
Timbo
Hi
Do you have a carburettor for 2&3/4 1915 Douglas.
Thanks
David
Hi Dave, Most of the good ones have gone, but I'll have a look in the box and see whats left when I can
Regards,
Bernie
P.M. me with you email address as a reminder
Hi
England seems a bit short of parts :(
Do you have any 2+3/4 rod assemblies ?
(A set of '13 barrels would go down nicely too, but I know that's asking a lot)
regards from England with a heatwave during the first week of Wimbledon :shock:
phil
Roland here from USA Washington state. Am looking for front brake caliper and brake handle for '25 Douglas 350. Any chance you have these? Email 605_rlix@comcast.net. Thanks