Handlebar levers

[oldtimerlover]

New made Levers
brass lever and steel holder
I have mounted them on my 1912 2 3/4hp
and on my 1915 4hp

[graeme]

What price?
Having made a couple of sets myself, and knowing how long it took me I am interested in levers already made!
Cheers, Graeme

[McGill]

Please advise where these handbar levers are made and cost of same krgds Ian.

[mudcrabber]

Hi  can you point me in the direction of where these can be found?

regards

Andrew Bartleet

[mudcrabber]

Hi could you advise me of where i can get apair.

regards

Andrew

[balintka]

Hi,

It sholud be great to get a pair for me too.
Thx for your help.

Balintka

[classicbike99]

I had a contact in Canada selling brass levers, They were not too expensive if I took a few sets I will try and locate him and prices.

[bluethruxton]

Hi guys, I'm new to this site and I have a very basket case 2 3/4 about '14 or '15 depending which bit you look at. It was once the property of Edward Demadian. I'm a LDC memeber and a neighbour of Malcome Brown.
I would be interested in a pair of levers if they are still available.
regards
Tim

[oldtimerlover]

Hi Tim
The price of the levers is 85,= euro each
If you want two that makes 170,= plus 14,- euro P&P for Great Britain
I still have a pair in stock
Regards
Hans

[Douglas PDC]

Bit of a long shot, are you still making / selling these levers. ?
Thanks
Paul

[JR34]

Are these possibly still available? If so, I would like to purchase.
Thanks,  John

[Scomoto]

Hi, I'm aware that this is an old post , but!   Is it still possible to get hold of these levers anywhere please ?

[oldtimerlover]

Hi, I'm aware that this is an old post , but!   Is it still possible to get hold of these levers anywhere please ?

Hello Scomoto I still have some sets of levers. do you need them for the curved or for the straight handlebar?
regards Hans Overveld

[Scomoto]

Hi , Thanks for the reply ,

I need the levers for the flat bars please

Let me know price and postage to the UK ,

Many thanks

Mike

[JR34]

Also, thanks for the reply. If the ones pictured are for the curved handlebars than I need the flat ones also.
Please let me know the amount including shipping to the USA.
Thanks.
John

[ppeat]

Hi , I wonder could I buy a set of handlebar levers. What email address should I use. Best regards Philip

[George Kulisiewicz]

Hello,
I am interested in a set of levers for a 1913 if you have them? Thanks George