« previous next »
Pages: 1

Author Topic: EW 350 Spark Plug  (Read 3349 times)

0 Members and 1 Guest are viewing this topic.

Offline LBHill

  • Full Member
  • **
  • Join Date: May 2010
  • Posts: 49
  • Location: Devonport, Tasmania.
EW 350 Spark Plug
« on: 05 Sep 2013 at 00:40 »
Wishing to know recommended spark plugs to suit EW 350 that
can be sourced easily.

Regards L Hill
Logged

Offline Alan Cun

  • Master Member
  • ****
  • Join Date: Feb 2007
  • Posts: 433
  • Location: Qld Central Burnett District
Re: EW 350 Spark Plug
« Reply #1 on: 05 Sep 2013 at 09:16 »
An 18 mil plug from NGK with a tapered base seal which is used in Falcon V8 NGK7 is very suitable here in Qld. Tas being a bit cooler you may get away with NGK6. Hope this helps .

regards Alan
Logged

Offline roy

  • Senior Member
  • ***
  • Join Date: Aug 2005
  • Posts: 164
  • Location: Bath, Somerset,
Re: EW 350 Spark Plug
« Reply #2 on: 05 Sep 2013 at 10:26 »
Hi L Hill, I have always used CHAMPION D16. Never had a problem in all the years I have had my EW.

Roy.
Logged

Offline oily bloke

  • Senior Member
  • ***
  • Join Date: Mar 2009
  • Posts: 220
  • Location: Surrey. UK
Re: EW 350 Spark Plug
« Reply #3 on: 05 Sep 2013 at 17:00 »
Hi Fellow EW owners,
I use NGK A6 plugs. You can use NGK AB6 plugs as well. The only difference is the AB variant has a smaller hex.
Cheers
Andy
Logged

Offline LBHill

  • Full Member
  • **
  • Join Date: May 2010
  • Posts: 49
  • Location: Devonport, Tasmania.
Re: EW 350 Spark Plug
« Reply #4 on: 06 Sep 2013 at 06:19 »
Thanks all for the advise I requested have sourced NGK AB6 plugs.
Don't suppose anybody could assist in some info on sourcing some
parts for the hand priming oil system and sight glass housing,having
difficulty in locating them,any leads or info would be greatly appreciated.
Regards L Hill
Logged
Pages: 1
« previous next »