Douglasmotorcycles.net

General => General Douglas Discussion => Topic started by: 916nik on 27 Aug 2013 at 10:50

Title: EW 350 Tappet Clerance
Post by: 916nik on 27 Aug 2013 at 10:50

Hi
I am wondering if any of the fine people in Douglas land can assist me with what clearance I should be running between the tappets and the valves on my EW?
Cheers
Nik

Title: Re: EW 350 Tappet Clerance
Post by: roy on 27 Aug 2013 at 19:50

Hi Nik,
          0.006 or 6 thou to us "olduns" is the recommended clearance.
According to the manual they need checking about every 500 mle.

Best of luck, Roy.

Title: Re: EW 350 Tappet Clerance
Post by: 916nik on 28 Aug 2013 at 08:49

Thanks Roy much appreciated