Douglas - For Sale Items

Douglas 1913 Model P motorcycle

Douglas - Wanted Items

Douglas 1915 3 Spd-Gearbox and Clutch

Quick Comments

Reminders, links to interesting topics, bump your own topic, quick comments or any short message of interest to members. Try it out!
Please note - 500 character current limit


Dave

2024-06-11, 21:02:05
Have you tried the new Drafts feature yet? I just lost a long message today and learned my lesson. It is a good idea to save a draft of any long post you are writing. You can then just keep writing and keep saving a draft, knowing you have a backup if there is a glitch. The draft is automatically deleted when you post the message.

Dave

2024-06-08, 19:30:04
For Sale
xman has two very nice 1950's machines available - a green 1950 mk4 and black 1951 mk5 - both in good condition and running well.

Dave

2024-06-07, 03:13:36

Dave

2024-06-03, 09:23:05
For Sale
Duncan has just listed his green and cream 1957 Dragonfly for sale with spares and documents.

Dave

2024-06-02, 09:34:05
Parts avalable
alistair still has parts available - barrels, carburettor, castings - see all listings.


Dave

2024-06-01, 19:33:27

Dave

2024-05-28, 01:09:46
Welcome to the new site!
Recommended viewing for a fast start...
 - Quick Tour of the Front Page
 - Quick Tour of the new Attachments
Learn all about attaching photos in the User Guide. Any problems with anything please Contact us     Faulty links fixed - 01June2024

Recent posts

#1
Quote from: Hutch on Today at 03:21Or possibly download the 1925 Handbook from Barnstormers Site in New Zealand for free?

https://www.barnstormers.co.nz/wp-content/uploads/2013/10/Douglas-350-PDF.pdf

It covers the earlier 2 3/4hp models so should have some useful information for you as a starting point. I have the 1913 booklet that EW-Ron refers to. If you require it, I can scan the relevant parts and post in this thread when I get a chance.

Cheers

Hutch
Hi Hutch, many thanks for that most appreciated. Very helpful indeed.
#2
Or possibly download the 1925 Handbook from Barnstormers Site in New Zealand for free?

https://www.barnstormers.co.nz/wp-content/uploads/2013/10/Douglas-350-PDF.pdf

It covers the earlier 2 3/4hp models so should have some useful information for you as a starting point. I have the 1913 booklet that EW-Ron refers to. If you require it, I can scan the relevant parts and post in this thread when I get a chance.

Cheers

Hutch
#3
The London Douglas Motor Cycle Club also do reprints from 1910 an onward. Available to members and non-members. See info further down on their Shop page:

https://douglasmcc.co.uk/shop/

-Doug
#4
Sounds like you are in the market for the original operators manual.
This was an all-in-one version back then.
Originals are highly sought after, and a photocopy contains exactly the same info.

https://www.nationalmotorcyclemuseum.co.uk/product/douglas-1913-sales-catalogue-instruction-manual-and-illustrated-parts-manual-all-in-one-all-models-geneva1495/

A slightly more detailed account of the same thing.
Curious that it commands a higher price  !!
https://www.vintagemotorcyclebooks.nl/en/product/douglas-motorcycles-1913-bms-photocopy-manual/

Hopethishelps.
#5
Hi,
I am assisting a friend who has restored a 1913 2 3/4. Please could someone give me some advice on how to start cold, tickover and stopping. Also what controls to use air/throttle, compressor. Is there a setting on the magneto? And how to change the low and high gear with neutral inbetween. Basically any help to ride/operate it would be useful. Many thanks in advance.
#6
General Douglas Discussion / Re: Number Plate GF 5656
Last post by saluki42 - 09 Nov 2024 at 10:27
Sorry about the delay in responding to your comment, I know that the plate is registered and taxed which is what I meant when I said still active. The DVLA also shows that the bike was first issued with this number in April 1992 though it possibly changed hands in July 2019. All this makes me think that it was issued with an age related registration number in 92.
#7
General Douglas Discussion / T35 crankshaft repair
Last post by Andy Smith - 09 Nov 2024 at 09:55
Damaged keyway on the flywheel end of the crank plan to get a new keyway cut can anyone think of anything that would effect the positioning? Andy 
#8
Hello MÜS,

if the surfaces of conrod and crankpin are not too bad, may be you can do a repair with oversize rollers.
If you want, you can send me a message and I explain the possibilities to you in German. I live in Germany.

Michael
#9
Simon,
          Assuming you have the genuine Douglas crashbars, there is no need to disturb the torsion bars - just remove the bolt from the front end of the torsion bar, but leave the lever in place. If you have non-genuine crashbars, put the bike on the centre stand, then lift it further by placing wooden blocks under the stand feet - this should completely unload the torsion bars.

  Regards,
               Eddie
#10
Simple question but I cannot find an answer:
Is there a way to remove the crash bars without releasing the torsion bar front lever? It took a 5' scaffold pole to get it back in place last time.

Thanks