« previous next »
Pages: 1

Author Topic: Rear brake lining model W 2 3/4 hp  (Read 2207 times)

0 Members and 1 Guest are viewing this topic.

Offline Lat Fuller

  • Full Member
  • **
  • Join Date: Jul 2014
  • Posts: 34
  • Location: Perth Western Australia
Rear brake lining model W 2 3/4 hp
« on: 24 Jan 2016 at 07:59 »
Van anyone suggest where I can find something like this ?    VMCC supplies a block for shaping, but the material is much harder.
Any suggestions very much appreciated
Logged

Offline kev

  • Senior Member
  • ***
  • Join Date: Mar 2014
  • Posts: 173
  • Location: gold coast
Re: Rear brake lining model W 2 3/4 hp
« Reply #1 on: 24 Jan 2016 at 09:56 »


 Lat
  have you tried truck brake and clutch shops...might be able to bond a couple of bits of friction material and  then shape it with a handgrinder
most of the new stuff requires a lot more pressure to work...

   
Logged

Offline ANTOINE

  • Member
  • *
  • Join Date: Nov 2013
  • Posts: 18
  • Location: FRANCE
Re: Rear brake lining model W 2 3/4 hp
« Reply #2 on: 24 Jan 2016 at 11:59 »
Hi
I have the same brake like your motorcycle (mine is a 2 3/4 HP from 1913). I have  changed the brake block by the block supplieS by the VMCC, but  you must adjusted the shape .There is on problem , the brake  is good works well and for several years.
regards
Logged
Pages: 1
« previous next »