« previous next »
Pages: 1

Author Topic: thread of sprocket securing nut  (Read 2616 times)

0 Members and 1 Guest are viewing this topic.

Offline roberto

  • Member
  • *
  • Join Date: Dec 2014
  • Posts: 8
  • Location: austria
thread of sprocket securing nut
« on: 22 Jan 2015 at 18:46 »
Hello,
I am new in this forum, and I work on a Ddouglas A31.
My first question concernes the gear box:
Is the thread of the sprocket securing nut a right or left one?

Many thanks for assitance
Roberto
Logged

Offline Doug

  • Administrator
  • ****
  • Join Date: Mar 2004
  • Posts: 4655
  • Location: Glen Mills, PA, USA
Re: thread of sprocket securing nut
« Reply #1 on: 22 Jan 2015 at 23:02 »
Roberto,

Both the input and output shafts nuts are right-hand thread. The tab washer behind the nut may be interfering with loosening the nut. Make sure it is folded down flat. 

-Doug
Logged

Offline roberto

  • Member
  • *
  • Join Date: Dec 2014
  • Posts: 8
  • Location: austria
Re: thread of sprocket securing nut
« Reply #2 on: 24 Jan 2015 at 19:12 »
Thank you Doug, it worked.

Roberto
Logged
Pages: 1
« previous next »