« previous next »
Pages: 1

Author Topic: Mark V Crankshaft nut - Flywheel end  (Read 2420 times)

0 Members and 1 Guest are viewing this topic.

Offline steveL

  • Full Member
  • **
  • Join Date: Feb 2011
  • Posts: 40
  • Location: Sutton Coldfield, West Midlands, UK
Mark V Crankshaft nut - Flywheel end
« on: 09 Mar 2014 at 10:31 »
Can anyone advise on what the spec is for the crankshaft nut on the clutch end of the crankshaft for a Mark V.

Many thanks

Steve.
Logged

Offline eddie

  • Master Member
  • ****
  • Join Date: Mar 2006
  • Posts: 1871
  • Location: Hampshire, UK
Re: Mark V Crankshaft nut - Flywheel end
« Reply #1 on: 09 Mar 2014 at 13:41 »
Steve,
          The nut for the flywheel end of the crankshaft should be 1.300"A/F x .625" deep. It is a slotted nut with a 7/8" x 20 tpi Whitworth form thread.

  Regards,
                Eddie.
Logged

Offline steveL

  • Full Member
  • **
  • Join Date: Feb 2011
  • Posts: 40
  • Location: Sutton Coldfield, West Midlands, UK
Re: Mark V Crankshaft nut - Flywheel end
« Reply #2 on: 09 Mar 2014 at 15:34 »
Thanks Eddie.

Steve
Logged
Pages: 1
« previous next »