Oversize rollers for crankshaft overhaul T35

[douglas1947]

Has anyone a source of oversize rollers 1/4" x 1/4"  + .0005 / +.001 or bigger?

Michael

[Ken Rogers]

Hi Michael,The Vintage Bearing Company (phone 01283509562 uk)can supply 1/4" x1/4"rollers in sizes +1thou or +2thou.They sell on ebay if you search item no 252239140261 .Hope this helps Ken

[tck]

oversize 1/4X1/4 rollers seems to remind me of something to do with burman clutches- can anyone tell me why?

[douglas1947]

Thanks for informations,
I will get the oversizes I need (very expensive but still the cheapest way!)

Burman boxes have normal no oversizes, but (I think the CP box has .250" x 6mm rollers, B52 box .250 x .250" rollers)


Michael

[RA23]

Hello there,
I sent an email a  week or so ago to say i would check my stock as the U K rollers at two pounds a piece were expensive and even with postage from here my price would be more attractive. As I had not had a reply I left it at that If you are interested I will check for you.
Cheers from down under,
                  Bob Barlow.    ( Forum R A  23 )

[Ken Rogers]

Hi again , Harley Davidson  do a lot of big end oversized rollers ,I am sure if you search the internet you will be able to find some.They are a lot cheaper in price about $12 for 25.There are some on ebay item no 271575508787 from instockmotorsports store but you would have to contact them to find out the exact size.Ken

[douglas1947]

Hi Ken,

I had checked Harley and also Indian rollers. Both makes have 1/4" rollers but they are longer than 1/4".

Michael

[douglas1947]

Hello there,
I sent an email a  week or so ago to say i would check my stock as the U K rollers at two pounds a piece were expensive and even with postage from here my price would be more attractive. As I had not had a reply I left it at that If you are interested I will check for you.
Cheers from down under,
                  Bob Barlow.    ( Forum R A  23 )

Hello Bob,

I havenīt got your email. Please try again: schloss-friedeburgqarcor.de

Michael

[RA23]

Sorry Michael,
The email is not working, I have 1/4'' standards and I think I have 1/4''  + .002'' .Let me know if I can be of help,
Cheers from down under,
                            Bob Barlow. ( R A 23 )

[douglas1947]

Hello Bob,

sorry, there is a mistake with the "@" in the email adress: schloss-friedeburg@arcor.de     .

Please try it again and let me know, how much you can sell and what price.

Thanks
Michael