1937 Douglas aero 600 4 speed Kickstart

[Chrisbates]

Does anyone have a good useable kickstart for my 1937 aero 600 please

[A31ndrew]

Hi Chris, if you are still looking, is this of any use? I'm pretty sure it's a Douglas but not certain which model.

[Chrisbates]

Thanks for your reply Andrew, can you confirm if the "spigot" is tapered and if possible the diameters at each end of the taper. Many Thanks

[A31ndrew]

Indeed it is. The larger diameter is 18.0 mm, the smaller is 15.3 mm. Centre-to-Centre, the overall length of the kickstart is about 168 mm.

[Chrisbates]

Again, thanks for the speedy reply Andrew, this sounds positive, however I am actually a messenger for Chris Bates who is looking for the kick start but does not have web access, I will pass on the good news to Chris in the morning, or if you wish, you can speak to him direct on this landline No ......01947 810301....... this is a Whitby, North Yorks number.

Many Many Thanks

Rob Hodgson

[Chrisbates]

Hello Andrew, Chris came to see me today and unfortunately your kickstart lever is not suitable for  his motor, but thanks for all the communications