Ian,
       Yes the brake bands could be either LH or RH. They can easily be reversed - just take the 2 rivets out of the bobbin, turn the bobbin round and re-rivet.

  Regards,
                 Eddie.

My OC uses the same plate but the band is reversed as it turns the other way !

Thanks DJS and Edie. Need to find suitable material for thrut disc.

The original thrust discs were 1/8" thick (3.2mm). The discs had a plain bore but were radiused on one side of the O.D. to clear the radius in the pressed steel plate. Originally, Douglas listed a steel shim to go under the thrust plate, but I have never actually come across one fitted on a working clutch.

Sadly now gone for scrap

LDMCC post-war spares have had tank caps remanufactured and they are currently in stock.

i found those two castings . i sent you an email about them did you get it?

Thanks John

Hi think you have the wrong guy this is johnb
Not doug

Hi Radzziu
Thank you for getting bact to me.
Looking forward to see what you got out of it.
Cheers Hoejmark