Author Topic: Need a pinion gear screw for a teens TS  (Read 3326 times)

0 Members and 1 Guest are viewing this topic.

Offline steveale

  • Full Member
  • **
  • Join Date: Oct 2014
  • Posts: 114
  • Location: Atlanta, GA, USA
Need a pinion gear screw for a teens TS
« on: 04 Oct 2016 at 14:42 »
I had a pinion gear screw strip during my cannonball run.  It's the large headed screw that holds the pinion gear onto the crankshaft end inside the timing chest.  The check ball and spring go behind it.  I had to use one from another Douglas bike since I had no inventory spare.  I had to put the working spare back over to the donor bike and now need a replacement for my original engine.  I think any 350 screw up to the early 20's is interchangeable...

Any leads would be appreciated.

Steve

Offline Hutch

  • Master Member
  • ****
  • Join Date: Nov 2012
  • Posts: 716
  • Location: Queensland, Australia
Re: Need a pinion gear screw for a teens TS
« Reply #1 on: 05 Oct 2016 at 02:12 »
Hi Steve,
PM me. I think I have a spare one, i'll have a look tonight.

Cheers

Ian

Offline Chris54

  • Full Member
  • **
  • Join Date: May 2013
  • Posts: 72
  • Location: Copthorne, West Sussex
Re: Need a pinion gear screw for a teens TS
« Reply #2 on: 05 Oct 2016 at 06:59 »
Hi Steve

If Ian draws a blank I will donate one, impressed with your efforts

Chris

Offline steveale

  • Full Member
  • **
  • Join Date: Oct 2014
  • Posts: 114
  • Location: Atlanta, GA, USA
Re: Need a pinion gear screw for a teens TS
« Reply #3 on: 27 Oct 2016 at 13:46 »
Thanks to all!  I have the needed parts!!!!  What a great group of folks here...