Author Topic: Re: 2 3/4 hp project  (Read 2689 times)

0 Members and 1 Guest are viewing this topic.

Offline Ian

  • Master Member
  • ****
  • Join Date: Jul 2004
  • Posts: 1231
  • Location: The Oaks, NSW, Australia
Re: 2 3/4 hp project
« on: 09 Jun 2016 at 03:02 »
A couple of photos attached. There are other parts I could include or not. I have pictured a number of cranks but probably only let two or three go.

Some details
1. Frame is good but has a weld on a bottom lug which should be cleaned up
2. Mag is fully rebuilt
3. Tank is painted
4. A number of new parts included including valves, guides, footpegs, etc
5. A set of footboards pictured can go with it but they are not correct
6. New pistons and the cylinders have been rebored to suit but have some minor surface rust that would have to be honed out
7. Rims not serviceable.
8. Gearbox is c1920

I don't intend to give this away as its got plenty of good parts. Open to offers - otherwise I may part out.

Inspection and discussion welcome

Offline steveale

  • Full Member
  • **
  • Join Date: Oct 2014
  • Posts: 113
  • Location: Atlanta, GA, USA
Re: 2 3/4 hp project
« Reply #1 on: 17 Jun 2016 at 03:24 »
pm me what you want for the complete lot.  As you know I need spares for the cannonball.  I am specifically interested in the mag if you part out.

Offline Ian

  • Master Member
  • ****
  • Join Date: Jul 2004
  • Posts: 1231
  • Location: The Oaks, NSW, Australia
Re: 2 3/4 hp project
« Reply #2 on: 24 Jun 2016 at 01:17 »
Now sold