Author Topic: Bernie's Douglas Collection - Part 1 - 2 3/4 engines  (Read 21006 times)

0 Members and 1 Guest are viewing this topic.

Offline Bernie

  • Full Member
  • **
  • Join Date: May 2014
  • Posts: 27
  • Location: Bay of Plenty; New Zealand
Expressions of interest are sought for a collection of 2 3/4 parts. Include 1913 engine, 1915 engine, 1920's frames, carriers, barrels, cranks and cases, toolbox's a seat (rusty), a swirl type exhaust pipe with a trace of original chrome, a couple of tanks one with original paint. Not sure of exact amount of everything as I've just started sorting it all out. There are also a pair of early (20's)  overhead valve heads with valves,one set of tappets and 2 oilers, although one has the tappet carrier broken off at the head. A clean break that could be easily repaired by a competent welder. There is a complete 1932 OHV 500 although its stripped down with a broken crank, the paint etc is in good condition. There is also a Dragonfly, although stripped down I believe it's complete, with very good paint and I think new exhaust pipes. Every thing is for sale, please see my other adds with photo's. Thanks.
« Last Edit: 13 May 2014 at 21:52 by Dave »

Offline kev

  • Senior Member
  • ***
  • Join Date: Mar 2014
  • Posts: 173
  • Location: gold coast
Re: Douglas Collection; Motorcycles and Parts (inc OHV)
« Reply #1 on: 06 May 2014 at 11:02 »
ernie

 kevin here from the gold coast..

  any chance of an EW petrol tank...mudguards??   primary chain cover??  throttle lever

Offline chris mac

  • Full Member
  • **
  • Join Date: Jan 2010
  • Posts: 26
Re: Douglas Collection; Motorcycles and Parts (inc OHV)
« Reply #2 on: 08 May 2014 at 01:54 »
I'd be interested in the 1912 engine as I have a 1912 with a dodgy 1919 engine also looking for a gearbox sprocket
Thanks
Chris Mac

Offline RockDr.

  • Full Member
  • **
  • Join Date: Mar 2012
  • Posts: 90
  • Location: Melbourne
Re: Douglas Collection; Motorcycles and Parts (inc OHV)
« Reply #3 on: 09 May 2014 at 00:24 »
Hi Bernie

If the tanks and carriers are still available I'll gladly purchase these of you.

Cheers
Chris

Offline simonandanni

  • Member
  • *
  • Join Date: Oct 2012
  • Posts: 4
  • Location: adelaide south australia australia
Re: Douglas Collection; Motorcycles and Parts (inc OHV)
« Reply #4 on: 09 May 2014 at 07:16 »
Hi Bernie im currently trying to restore a 1927 350 EW and would be interested in any parts you have for that model in particular brake backing plates intake manifold exhaust system fuel tank caps primer cover and oil and fuel lines     Thanks  Simon in south oz

Offline Bernie

  • Full Member
  • **
  • Join Date: May 2014
  • Posts: 27
  • Location: Bay of Plenty; New Zealand
re: Bernie's Douglas Collection - Part 1 - 2 3/4 engines
« Reply #5 on: 11 May 2014 at 09:09 »
Hi, I'm going to attempt to upload some photo's of some of the stuff from Dad's (Jack Kennington) estate. I'm sorry if I havn't answered some of your messages, I'm a bit overwhelmed by the response and when trying to reply from my phone, they've gone to the administrator instead. So please view the photo's and I'll do my best to answer any questions
Bernie






















« Last Edit: 13 May 2014 at 22:06 by Dave »

Offline ste

  • Senior Member
  • ***
  • Join Date: Sep 2004
  • Posts: 195
  • Location: Oamaru, New Zealand
Re: Douglas Collection; Motorcycles and Parts (inc OHV)
« Reply #6 on: 13 May 2014 at 06:12 »
Hi,
I'm doing a 1924 TS and would be interested in the seat, mudguards if you have them, sprocket for a gearbox, and any footbrake parts please?

Regards,
Stephen

Offline Bernie

  • Full Member
  • **
  • Join Date: May 2014
  • Posts: 27
  • Location: Bay of Plenty; New Zealand
Re: Douglas Collection; Motorcycles and Parts (inc OHV)
« Reply #7 on: 13 May 2014 at 08:52 »
Hi Stephen, which seat are you after, There are 2 seat pans in quite good condition and a sprung frame (quite rusty but salvageable) for a leather saddle. No mudguards and I havn't found any sprockets or foot brake parts yet. If you can send me your email I can send you a photo of the seats, There is already some interest in the Pans.
Regards, Bernard

Offline aphex

  • Member
  • *
  • Join Date: Oct 2011
  • Posts: 17
  • Location: Belgium
  • Douglas S6 1930
Re: Douglas Collection; Motorcycles and Parts (inc OHV)
« Reply #8 on: 13 May 2014 at 17:05 »
Hi, Bernie

I'm wandering if the rear chainguard that is on one of the pictures placed on the backrack of the 350 is available ( this would be very helpfull on the restauration of my S6), and also if the batterycarrier ,the saddle cover and the rear mudguard of the same bike are for sale.

Regards.
Sven

Offline ste

  • Senior Member
  • ***
  • Join Date: Sep 2004
  • Posts: 195
  • Location: Oamaru, New Zealand
Re: Bernie's Douglas Collection - Part 1 - 2 3/4 engines
« Reply #9 on: 16 May 2014 at 10:40 »
Hi Bernie,
I tried to PM you. Did you get it?

Offline Dave

  • Administrator
  • ****
  • Join Date: Mar 2004
  • Posts: 4349
  • Location: Australia
Re: Bernie's Douglas Collection - Part 1 - 2 3/4 engines
« Reply #10 on: 16 May 2014 at 21:33 »
Had a short message from Bernie saying he was in hospital having surgery after a spider bite, but he expects to be back on deck in a day or two.

Offline ste

  • Senior Member
  • ***
  • Join Date: Sep 2004
  • Posts: 195
  • Location: Oamaru, New Zealand
Re: Bernie's Douglas Collection - Part 1 - 2 3/4 engines
« Reply #11 on: 16 May 2014 at 21:45 »
Thanks for letting us know. Hope he gets better soon.

Offline Kavat

  • Member
  • *
  • Join Date: Jun 2014
  • Posts: 5
  • Location: West midlands
Re: Bernie's Douglas Collection - Part 1 - 2 3/4 engines
« Reply #12 on: 01 Jul 2014 at 19:54 »
Hi I am looking for a saddle type fuel tank looks the same as the tank in the pictures twin caps
Could you let me know if you have one .
Many thanks
Kavat

Offline Bernie

  • Full Member
  • **
  • Join Date: May 2014
  • Posts: 27
  • Location: Bay of Plenty; New Zealand
Re: Bernie's Douglas Collection - Part 1 - 2 3/4 engines
« Reply #13 on: 06 Jul 2014 at 07:29 »
Hi Kavat, only the tank on the bike and it must go with it, thanks

Offline spider2127

  • Member
  • *
  • Join Date: May 2014
  • Posts: 16
  • Location: Perth WA
Re: Bernie's Douglas Collection - Part 1 - 2 3/4 engines
« Reply #14 on: 09 Jul 2014 at 23:41 »
Hio Bernie, do you still have the rear rack and tool boxes/bags?
Cheers Spider

Offline Bernie

  • Full Member
  • **
  • Join Date: May 2014
  • Posts: 27
  • Location: Bay of Plenty; New Zealand
Re: Bernie's Douglas Collection - Part 1 - 2 3/4 engines
« Reply #15 on: 20 Jul 2014 at 05:19 »
Hi Spider, If you mean the carrier and tool box's on the B32, they go with the bike. I mean to start another add with better photo's of the B32 and parts.

Offline hernny

  • Member
  • *
  • Join Date: Nov 2014
  • Posts: 3
  • Location: argentina
Re: Bernie's Douglas Collection - Part 1 - 2 3/4 engines
« Reply #16 on: 22 Nov 2014 at 13:56 »
Berny, i ma interested in a complete engine (with gearbox), between 1915 and 1928. Do you have any of this? And how much it cost in US dollar?
Excuse me for my English, I am waiting your respond.
best regards from Argentina.
Hernan.

Offline veikko1

  • Full Member
  • **
  • Join Date: Nov 2014
  • Posts: 74
  • Location: Finland
Re: Bernie's Douglas Collection - Part 1 - 2 3/4 engines
« Reply #17 on: 26 Nov 2014 at 19:54 »
Hello Bernie
I am thinking if you have any conrods to my 1914 23/4 model U?
Regards Veikko

Offline Christoph

  • Member
  • *
  • Join Date: Dec 2014
  • Posts: 3
  • Location: Germany
Re: Bernie's Douglas Collection - Part 1 - 2 3/4 engines
« Reply #18 on: 20 Dec 2014 at 19:30 »
Hi Berni, we are currently restore a DT 5 engine 600 ccm and are in need of the following parts:

1.   Worm drive shaft of the oil pump, which is unfortunately missing in the engine
2.   Crank shaft , the one we have is in bad condition
3.   Two connecting rods, are the reproductions available?
4.   Air filter box
5.   1 lubrication oiler
6.   Flywheel with good conus
7.   At the rear brake: knee leaver or toggle clamp

Any help with parts or information who might have such parts wound be very helpful for us! :)
Thank you very much for your help! Regards Christoph

Offline atuliyajain

  • Member
  • *
  • Join Date: Jun 2014
  • Posts: 2
  • Location: new delhi, India
Re: Bernie's Douglas Collection - Part 1 - 2 3/4 engines
« Reply #19 on: 16 Feb 2015 at 08:24 »
hi
 I am interested in the 1913 and 1915 engine and the four cylinder heads.
If available please quote the price for shipping in India
Thanks
Rakesh Jain

Offline Bernie

  • Full Member
  • **
  • Join Date: May 2014
  • Posts: 27
  • Location: Bay of Plenty; New Zealand
Re: Bernie's Douglas Collection - Part 1 - 2 3/4 engines
« Reply #20 on: 25 Feb 2015 at 05:13 »
Very sorry Rakesh, the engines have been sold. I have some cylinders left what ones are you wanting?
Bernie

Offline steveale

  • Full Member
  • **
  • Join Date: Oct 2014
  • Posts: 114
  • Location: Atlanta, GA, USA
Re: Bernie's Douglas Collection - Part 1 - 2 3/4 engines
« Reply #21 on: 02 Mar 2015 at 00:27 »
pm sent...

Offline carl denton

  • Full Member
  • **
  • Join Date: Aug 2011
  • Posts: 95
  • Location: bunbury australia
Re: Bernie's Douglas Collection - Part 1 - 2 3/4 engines
« Reply #22 on: 23 Mar 2015 at 14:37 »
hello I am looking for a 1924 belt drive frame and a set of handle bars also a timing cover and 2 front cylinders and pistons ?


yours carl denton .

Offline timbo

  • Member
  • *
  • Join Date: Jun 2015
  • Posts: 1
  • Location: adelaide
Re: Bernie's Douglas Collection - Part 1 - 2 3/4 engines
« Reply #23 on: 16 Jun 2015 at 22:47 »
Hi Berniw,
Is the compleate ohv bike (with dismantled engine) still available, if so can you give me an indication of the asking price please?
Thanks
Timbo

Offline Dave@NZ

  • Full Member
  • **
  • Join Date: Feb 2013
  • Posts: 35
  • Location: New Zealand
Re: Bernie's Douglas Collection - Part 1 - 2 3/4 engines
« Reply #24 on: 21 Jun 2015 at 05:34 »
Hi
Do you have a carburettor for 2&3/4 1915 Douglas.
Thanks
David

Offline Bernie

  • Full Member
  • **
  • Join Date: May 2014
  • Posts: 27
  • Location: Bay of Plenty; New Zealand
Re: Bernie's Douglas Collection - Part 1 - 2 3/4 engines
« Reply #25 on: 25 Jun 2015 at 08:38 »
Hi Dave, Most of the good ones have gone, but I'll have a look in the box and see whats left when I can
Regards,
Bernie
P.M. me with you email address as a reminder

Offline phil_h

  • Full Member
  • **
  • Join Date: Aug 2009
  • Posts: 74
  • Location: Pulborough, W.Sx, UK
Re: Bernie's Douglas Collection - Part 1 - 2 3/4 engines
« Reply #26 on: 03 Jul 2015 at 18:03 »
Hi
England seems a bit short of parts  :(
Do you have any 2+3/4 rod assemblies ?
(A set of '13 barrels would go down nicely too, but I know that's asking a lot)

regards from England with a heatwave during the first week of Wimbledon  :shock:
phil

Offline Syn

  • Member
  • *
  • Join Date: Sep 2010
  • Posts: 12
  • Location: Seattle, Washington USA
Re: Bernie's Douglas Collection - Part 1 - 2 3/4 engines
« Reply #27 on: 24 Mar 2016 at 20:27 »
Roland here from USA Washington state. Am looking for front brake caliper and brake handle for '25 Douglas 350. Any chance you have these? Email 605_rlix@comcast.net. Thanks
-- It is within the power of every man to live his life nobly, but of no man to live forever. Yet so many of us hope that life will go on forever, and so few aspire to live nobly. --Lucius Annaeus Seneca